|
Chomerics THERMFLOW T725 Thermal Pads
90 available.
Ships TODAY if ordered by 1:00 PM Pacific Time.
Price: $2.49
Item# T725
Ship Wt: 0.01 pounds
|
Chomerics THERMFLOW T725 Thermal Pads
THERMFLOW T725 material is a new addition to Chomerics THERMFLOW family of phase change
materials.
These pads can be used wherever high thermal transfer and low thermal impedance are required.
Typical applications are thermal interface pads for microprocessors, power modules and anywhere else thermal grease is used.
Unlike thermal grease, T725 is solid at room temperature and is easy to handle during
assembly.
EACH PAD IS DIE CUT 1" Square with dual sided plastic that peels off for easy application.
The pads are the Standard Thickness of 0.125 mm / 0.005 in. thick.
Pricing is for ONE PAD each.
Typical T725 Pad Installation Steps
- If necessary, clean the heat sink base of any machine oils, greases, hand oils, or other
contaminants. Wiping with a solvent such as isopropyl alcohol, MEK, or toluene will
work.
- Peel the T725 pad (with blue release liner and pull-tab still in place) from the clear
carrier strip.
- Place the T725 pad on the heat sink with the pink side down and apply pressure on the
blue release liner side to ensure intimate wetting of the T725 pad to the heat sink
surface. This pressure, approximately 3,000 grams (6 pounds) on a 1-inch by 1-inch
pad can typically be achieved manually by rolling a soft rubber wheel (like a small
wallpaper roller) back and forth over the pad. The table above gives some
recommended temperature/pressure conditions for best installation performance.
- The blue release liner serves to prevent the T725 pad from being contaminated with dirt
and dust during shipping/handling of the heat sink to the final system assembly location.
The blue liner should be removed just prior to mounting the heat sink onto the
component.
- When removing the pull-tab, use a quick, lifting motion. This is preferable over peeling
the pull-tab from the T725 pad and heat sink. To ensure optimal wettingof the T725
pad to the heat sink it is recommended that the parts be allowed to dwell one hour prior
to attempting release liner removal.
- With heat sink and pad in place on the component, install heat sink clip, screws or
mechanical fasteners.
View or download the CHOMERICS THERMFLOW T725 APPLICATION GUIDE
for more detailed information.
Shipping Info
We offer shipping by UPS, United States Postal Service(USPS) and FEDEX. In the interest of providing the most cost effective and timely delivery of products, we reserve the right to ship by USPS, UPS, FEDEX or other carrier, AT OUR OPTION, and as we deem necessary.
We may use any of these or other carriers as an alternate or substitute for the carrier you actually select during checkout.
If we do excercise this option, we will select a class of service that is at least equal to or faster than the method you selected.
You can select your choice of shipping options in the drop down window during checkout.
We endeavor to ship orders the same day we receive payment confirmation, or on the next business day.
We process and ship orders as we receive them, without delays.
We guarantee to ship all orders within 24 to 48 hours of payment confirmation, Monday through Friday.
We do not ship on Saturdays.
USPS Express Mail next day and FEDEX Standard Overnight delivery are available if your order and payment are received BEFORE 12:00 PM Pacific Time, the same day. FEDEX OVERNIGHT orders placed on FRIDAY, will be shipped the same day.
However, there is NO SATURDAY DELIVERY OPTION available. Orders placed Friday will likely be delivered the following Monday, if it is a regular business day. Orders of 10 pieces or more requiring custom termination or connectors may be delayed.
PLEASE NOTE:
FEDEX Express SAVER and FEDEX 2 DAY are NOT expedited services and will be processed in the order in which they are received, and shipped within 24 to 48 hours.
All FEDEX, UPS NEXT DAY and Express Mail Overnight/Next Day Services are exclusively available to destinations where air and ground transportation networks make it possible for FEDEX, UPS or USPS to provide the overnight delivery service they guarantee. Each USPS Post Office establishes its own network of destinations for overnight Express Mail.
For those areas not on the next-day network, USPS offers Express Mail Second Day Service.
Your local Post Office maintains an Express Mail directory for your ease in determining if your destination can be reached overnight.
INTERNATIONAL SHIPPING:
We use USPS for International Shipping.
The ONLY METHODS we will use are USPS GLOBAL EXPRESS International or PRIORITY MAIL International.
OTHER METHODS:
For orders over $250.00 or of extreme weight, we can ship by UPS or FEDEX and bill it to your own account.
There is a small handling fee for this service, so contact us by telephone or email FIRST, for details.
LOCAL PICKUP & WILL CALL: We are strictly an internet-based operation and do not have the faciities or capability to provide for in-person pick up or will call. |
|
|
|